Factory production out of the acrylic sheet are uniform size and shape to be applied to a variety of products must first be cut, 5mm clear acrylic sheet is through the cutting. "Acrylic cutting" is to cut acrylic processing, due to the nature of the acrylic itself is easy to process, processing methods will also be a variety of ways.
Manual cutting needs to use a plywood knife in the acrylic plate cut a straight line thin groove, and then put the acrylic plate on the straight edge of the straight edge of the worktable, the acrylic plate straight line groove aligned with the edge of the operating table, with a hand downward pressure, the acrylic plate immediately along the straight line groove neatly disconnected in the cutting position at the mark, wear good cut-resistant gloves, with a hook knife to cut along the cutting line, and then sandpaper will be cutting Then use sandpaper to smooth the cutting surface. With scissors or small saws along the scribe line slowly cut acrylic sheet, it should be noted that the scissors or small saw should be selected sharp, and need to cut slowly along the scribe line, to avoid cutting or rupture of the acrylic sheet in the cutting process. Cutting tools such as hook knife, hobby knife, plywood knife, the first acrylic sheet flat on the ground, and then determine the position to be cut, with the cutting tool to cut along the cutting line, if the cutting position of the sheet there are problems such as unevenness, you can use sandpaper to sand the cutting surface flat.
We as clear acrylic sheet manufacturers, after cutting, will then be processed to produce different types of acrylic sheet, such as Black opaque acrylic sheet, day and night acrylic sheet and so on, welcome to buy.