1.Material selection
Priority is given to the use of 1.5-2mm thickness of silver glitter acrylic sheet, silver fine glitter particles (particle size 0.2-0.3mm) distribution of uniformity of the plate feel more delicate, and moderate transmittance, not only through the mobile phone logo, but also through the silver glitter to create a sense of low-key luxury. It is recommended to choose silver glitter acrylic sheet with surface pre-coated with anti-scratch UV layer, or spray transparent protective lacquer after production to avoid silver glitter particles falling off due to friction.
2. Design and Processing
We can use the reflective properties of silver glitter acrylic sheet to design light and shadow interactive effects: hollow out the star pattern on the back of the phone case, paste black PET film on the bottom layer, and under the strong light, the silver glitter acrylic sheet and the hollowed out contour will form a stellar projection effect. Laser cutting, the power will be adjusted to 40W, speed 80mm / s, to ensure that **silver glitter acrylic sheet** edge without scorched black, after cutting with 600 mesh sandpaper with acrylic polishing paste polishing, so that the silver glitter particles in the edge of the more translucent.
3.Assembly and Adaptation
Adopt silver glitter acrylic sheet + transparent TPU' composite structure: the inner layer of TPU soft rubber thickness of 0.5mm, fixed with the silver flash plate through the ring-shaped buckle, not only to cushion the impact of the fall, but also to avoid the brittle cracking problem of the pure acrylic shell. The button area is embedded with a silver silicone cap, which forms a colour echo with the silver glitter acrylic sheet, and at the same time enhances the clarity of the pressing feedback. If you are looking for the ultimate in thinness and lightness, you can use the 1mm thick silver glitter sheet to cut the full wrap-around style, with 30° rounded edges to enhance the comfort of your grip.










